Rocktron Taboo Twin - Manual (Page 22)

19
The Taboo Twin provides 128 stored sounds called presets. Any of the 128 presets
can be called up at any time via the front panel PRESET control, or by a remote MIDI
footswitch.
Each Taboo Twin preset is divided up into individual blocks called functions (such as
"Mixer", "Reverb", etc.). Within each function is a set of parameters which allow you to
manipulate various aspects of that function. It is the setting of each of the parameters
which determines the overall sound of each Taboo Twin preset.
Each of the Taboo Twin's 128 preset locations can be edited, copied over and re-
stored to original factory state as many times as necessary. These tasks, and many
others, are described in detail in section 7,
"Operating the Taboo Twin".
6. General Operating Format
Taboo Twin Presets
Changing the Preset Sounds
The sound of each preset is determined by the effects that are selected as well as
the settings of their respective parameters. Effects are selected and deselected by
pressing their relevant buttons on the front panel.
Some effects can be inserted into the audio path regardless of any others that are
currently selected, while others require that some other effect is switched out before
becoming active. For this reason, the effects are grouped into two separate sections on
the front panel, as shown below.
Only one of the above effects may be selected at any given time...
...while any combination of these effects can be selected.