Rocktron Taboo Twin - Manual (Page 61)

58
Step 4 Turn the P RESET control on the transmitting Taboo Twin to the preset that is to be dumped into
the receiving Taboo Twin. As the P RESET control is turned, the preset number will be displayed
in the first three characters of the display.
32 PR DUMP/LOAD
Step 5 Use the P RESET control on the receiving Taboo Twin to select the preset location to store the
received preset. The preset currently stored at the selected location will be lost when the new
preset is received, therefore caution should be used when selecting a preset location.
122 PR DUMP/LOAD
Step 6 To initiate the dump, press the S
TORE
button on the transmitting Taboo Twin. The transmitting
Taboo Twin will display the preset number being dumped and "DUMPED". The receiving
Taboo Twin will display the preset location being stored to and "RECEIVING..." while it
receives and stores the preset parameters and title.
122 RECEIVING... 32 DUMPED
After all the information for the dumped preset is stored, the receiving Taboo Twin will display
"LOADED". The receiving Taboo Twin also recalls the loaded preset at this time so that it
may be verified.
122 LOADED
Receiving Taboo Twin
Transmitting Taboo Twin Receiving Taboo Twin
Transmitting Taboo Twin
Receiving Taboo Twin
G
Note
If there is an error in transmission, the unit will display "RECEIVE ERROR". Should this
occur, check connections and try again. If other errors occur, check the Error Mes-
sages chart in the Appendix.