Rocktron Taboo Twin - Manual (Page 9)

6
6 Dual function controls
The function of each of these controls is dependent upon the current status of the
M
ENU button. The upper label denotes the function of the control when Menu mode is
active, while the lower label denotes the function of the control in Instant Access mode.
P ARAMETER A DJUST / E FFECT L EVEL control
When Menu mode is active (i.e., the M ENU button is lit), this control is used to adjust a
displayed parameter value.
When the active edit mode is Instant Access (i.e., the M ENU button is not lit), this
control is used to determine the level of the chorus, phaser, tremolo, wah, flange or pitch
effect (whichever is currently active).
P ARAMETER S ELECT / D ELAY L EVEL control
When the M ENU button is lit, this control is used to scroll through the available
parameters under the current function heading.
When in the Title Edit function, this control is used to scroll through the available
character locations to be edited.
When the M ENU button is not lit, this control is used to determine the overall delay
level for the current preset. Turning this control will automatically display the Delay
Level parameter.
F UNCTION S ELECT / R EVERB L EVEL control
In Menu mode, this control is used to access each of the primary functions of the
Taboo Twin. These functions include:
Global Pre EQ Phaser Delay Footswitch
Mixer Post EQ Flanger Reverb Program Changes
High Gain Compressor Tremolo MIDI Channels Controller Assign
Low Gain Pitch Shift Title Edit MIDI Dump/Load HUSH
Wah-Wah Chorus Factory Restore
Once a function has been selected, the parameters for the function are accessible via
the P
ARAMETER S ELECT control.
When the M ENU button is not lit, this control is used to determine the overall reverb
level for the current preset. Turning this control will automatically display the Reverb
Level parameter.
When a parameter value
has been altered from its
original value, the S TORE
button will light to indicate
that the preset has
changed. The S TORE button
will then stay lit until either
the altered preset is stored,
a new preset is selected, or
all parameters for the
current preset are returned
to their original values.
G