Spectrum Controls 2080sc-BAC - Manual (Page 20)

3-2 Chapter 3: Configuring the Module
User’s Manual Pub. 0300274-01 Rev. A.0
To access the software on your module:
1. Access your PC local area connection properties dialog as shown below:
Start:Control Panel:Network and Sharing Center:Change Adapter
Settings:Local Area Connection Settings:Properties.
2. From the Local Area Connection n Properties dialog, select the Internet
Protocol Version 4 (TCP/IPv4) option:
3. Change the settings to the equivalent settings for your personal computer
as shown next:
4. Open a web browser and type in the IP default address of your BACnet
module, which is 169.254.3.3.