Star Headlight & Lantern 9018 Series - Manual (Page 3)

-2-
Red - (Power) Connect to +12 VDC through your switch. Be sure to use a 20
amp fuse when connecting the switch to the positive side of the power
supply.
Black - (Ground) Connect to the negative side of the battery.
Green w/Yellow - (Optional - High/Low) Switches the light between High and Low
power.
• High Power Only: Leave disconnected
(cover wire with wire nut or tape)
• Low Power Only: Connect to Ground
• High/Low Switching Option: Connect to Ground through a switch
Red w/Green - (Pattern Select) Touch and release to +12 VDC to change patterns
(see next page).
CAUTION: All of our DC powered warning lights are polarity sensitive. These lights are
polarity protected only if the appropriate fuse is used. All wires connected to the positive
terminal of the battery should be fused at the battery for their rated load. Testing the
light before this fuse is properly installed will void the warranty on the light.
Wiring for Permanent Mount Models