Star Headlight & Lantern ULB28 Lineum Dual-Color Split-Phanto Interior LED Lightbar - Manual (Page 3)

-2-
Mounting
There are several optional mounting brackets that can be used to mount your Split
Phantom ™. Your light comes with the one that was selected at the time the light was
ordered. Please review the separate mounting instructions that are included, based upon
the mounting option that was selected.
274-ULB21-U1 Universal Mounting Kit
274-ULB21-CH 2006-2010 Dodge Charger
2007-2008 Dodge Magnum
2009 Dodge Ram
274-ULB21-CH11 2011-2014 Dodge Charger
274-ULB21-CP 2011-2013 Chevrolet Caprice
274-ULB21-CV 2006-2011 Ford Crown Victoria
2009 Ford F150 and F250
274-ULB21-EX 2006-2013 Ford Explorer
2007-2013 Ford Expedition
274-ULB21-IM 2008-2013 Chevrolet Impala
274-ULB21-INT 2012-2013 Ford Interceptor (Taurus)
274-ULB10-RM 2012-2013 Dodge Ram 1500
274-ULB21-TA 2007-2013 Chevy Tahoe
2007-2013 Chevy Yukon
2007-2011 Chevy Suburban
Please Note: Every ULB28 comes with a standard baffle included. The 274-ULB21-CH
and 274-ULB21-CH11 kits also include a separate baffle that is specifically designed to
fit the Dodge Charger. It should be used in place of the standard baffle included.
The
Split Phantom ™ is designed to be mounted on the
inside of your vehicle. It is not intended for exterior
applications and is not warranted against water damage.
It is the sole responsibility of the owner to ensure the warning
light is secure. Check your light every time you enter the
vehicle to ensure that it is mounted securely. The manufacturer
assumes no responsibility for the secure mounting of this light.
GASKET CURVED UP
Gasket Installation
1. Before installing any of the brackets, slide
the enclosed rubber channel over the
front edge of the baffle.
2. Install the gasket such that it curves
upward as pictured to the right.