Star Headlight & Lantern TDDL15 Series High Intensity User Manual
Page 6
-4-
(Mounting CONT’D)
CAUTION: Be sure to carefully inspect and test the integrity
of your mount.
4. Whether you are using the L-Brackets or not, slide the bolts to their desired location
along the track and mount the bolts through pre-drilled holes in your vehicle or through
the mounting brackets. Use one each of the enclosed flat washer and nut on each
bolt. If you are using the L-brackets provided, you will need to supply the appropriate
bolts or other fasteners to attach the brackets to your mounting surface.
Please note that there is a label on the extrusion that indicates
which side should be facing up. If you do not have the proper
side up, the lightstick will direct traffic in the opposite direction.
In addition, there are ventilation holes in the endcaps to help
eliminate any condensation. If the lightstick is mounted on the
exterior of the vehicle, these ventilation holes must remain
towards the bottom of the lightstick.