StorCase Technology DE200i-SWCU2 - Manual (Page 29)

StorCase Technology, Inc. DE200i-SWCU2 User's Guide - Rev. A01
22 Appendix B - Factory-Installed Options
Carrier Installation
Follow the procedures below to install the DE200i-SWCU2 carrier into the receiving frame
equipped with the isolator board.
1. Install the Carrier into the Receiving Frame. A "u" will be present on the front
panel.
2. Turn the key lock mechanism, located on the front of the receiving frame,
counterclockwise to the ON position. This locks the drive into the receiving frame
and activates the isolator board. The drive will begin to spin up and the unit ID
number on the display will begin flashing.
3. After a short length of time the unit display will stop flashing, indicating that the
device is ready to be used.