DoorKing 1817 User Manual
Owner’s manual
Advertising
Table of contents
Document Outline
- SECTION 1 - INSTALLATION
- SECTION 2 – WIRING
- 2.2.1Weigand Power Terminals
- 2.2.2Weigand Data Terminals
- 2.2.3Elevator Control Terminals
- 2.2.4RS-232 Terminals
- Controlling a Single Door or Gate
- Controlling a Gate Operator and Pedestrian Gate (or Door)
- 2.3.3Controlling a Gate Operator and Two Pedestrian Doors (or Gates)
- 2.3.4Tracker Expansion Board Control
- SECTION 3 – PROGRAMMING
- STOP!!
- 3.3.1Relay Strike Time
- 3.3.2Talk Time
- 3.3.3Tone Open Numbers
- 3.3.4Postal Switch
- 3.3.5Touch-tone / Rotary-dial
- 3.3.6Rotary-dial 9
- 3.4.1Programming Letters and Numbers
- 3.4.2Programming the User Message – 1815 Systems
- 3.4.3Programming the Instruction Message – 1815 S
- 3.4.4Programming the User Message – 1817 Systems
- 3.4.5Programming the Instruction Message – 1817 S
- 3.5.1Programming the Directory Code Length
- 3.5.2Programming 7-digit Phone Numbers
- 3.5.3Programming Area Codes
- 3.5.4Programming Phone Numbers with Area Code Reference
- 3.5.5Programming Names (1815, 1817 Systems Only)
- 3.5.6Deleting Individual Phone Numbers
- 3.5.7Delete Names (1815, 1817 Systems Only)
- 3.5.8Delete Area Codes
- 3.5.9Display Phone Numbers (1815, 1817 Systems Only)
- 3.6.1Programming Device Codes
- 3.6.2Deleting Device Codes
- 3.7.1Programming Four-digit Entry Codes
- 3.7.2Delete Four-digit Entry Codes
- 3.7.3Entry Code Ranges
- SECTION 4 – ADJUSTMENTS
- 4.1Speaker Volume
- 4.2Feedback
- 4.3Click Sensitivity
- 4.4Display Contrast (1815 Only)
- 4.5Display Contrast (1817 Only)
- 4.6Back-light Cutoff (1817 Only)
- 4.7Master Code Switch
- 4.8Ring Pin
- 4.9Relay 2 Contact Pin
- 4.10Auto – 1816 Pin
- 4.11HF – HS Pin
- 4.12Security Level Pin
- 1815 Adjustment Locations
- 1817 Adjustment Locations
- SECTION 5 – OPERATING INSTRUCTIONS
- SECTION 6 – MAINTENANCE