Partitions – StorCase Technology InfoStation 16-Bay 3U SCSI/SATA User Manual
Page 59
46
RAID Controller Configuration
StorCase Technology, Inc.
InfoStation 16-Bay RAID User's Guide - Rev. F00
Partitions
NOTE:
Please familiarize yourself with the following information before proceeding
to section "Setting Up Multiple Partitions" on page 47.
Partitions Greater than 2TB
If creating a RAID array larger than 2TB in total capacity, two (2) partitions will be created.
1.
Partition 1 will be approximately 2TB.
2.
Partition 2 will be the remaining capacity beyond 2TB (unless otherwise specified).
3.
If equal partitions are desired, change Slice 01 to capacity = 0GB. Once Slice 01
capacity is changed, change Slice 00 to desired capacity.
You are now ready to proceed to section "Viewing Default Partition Configuration".
VIEWING DEFAULT PARTITION CONFIGURATION
1.
<TAB> to the Menu (left) side of the screen and press <ENTER>.
2.
Enter password (default password = 00000000).
3.
Select RAID Funcs. Press <ENTER>.
4.
Select Statistics. Press <ENTER>.
5.
<TAB> to the Output (right) side of the screen and press <ENTER>.
6.
Scroll up to the "RAID Statistics" section to view Partition values.