Taser Axon-Flex - Manual (Page 8)

8
Hardware Details
3
This chapter describes preparing and using the universal magnetic mount. For additional information on using
the universal mount and other mounts, see the instructional videos for assembling AXON flex hardware at www.
TASER.com.
If the camera system causes discomfort or headaches, adjust the system for comfort. NEVER wrap cables around
the neck.
The AXON flex system uses magnets in many of its mounting systems. The AXON flex camera and AXON flex
controller both contain batteries. Do not let the magnets come into contact with the batteries. Magnets can
cause damage to the batteries.
Preparing the AXON flex Camera
All AXON flex cameras shipped from the factory are configured to be installed on the right side of the body. If
you wish to wear a camera on the left side, you will have to adjust your settings through the EVIDENCE Sync
software or on the EVIDENCE.com website to re-orient the camera.
The side on which you wear the camera is configured through the EVIDENCE Sync software. Try wearing your camera
on your dominant side and your non-dominant side to find what works best for you. If you have the AXON Mobile
application, you can view live video and determine if the camera is pointed where you want it. See the AXON Mobile
for Android Devices or AXON Mobile for IOS Devices manuals for more information on how to do this.
Cable connectors are inserted into the rear of the AXON flex camera. The connector has an assembly that clasps to
the camera for a more secure fit. Both straight and coiled cables are also available.