Taser CAM-HD User Manual
Page 13
TASER CAM HD Recorder
MMU0036 Rev: B
Page 13 of 48
4.
A green light near the TASER CAM HD lens will flash to indicate
charging.
5.
When charging is complete, the green light will remain steady.
6.
After unplugging the charging cable from the TASER CAM HD recorder,
remember to replace the dataport plug on the TASER CAM HD recorder
to prevent damage from any debris or moisture.
Charging the TASER CAM HD Recorder Using the PC USB
Download Cable
Note: Do not connect the TASER CAM HD recorder to your computer until
you have installed the EVIDENCE Sync software. See Chapter 5:
Configuring the TASER CAM HD Recorder with EVIDENCE Sync
Software.
1.
Connect the USB download cable to the TASER CAM HD recorder.
2.
Connect the USB download cable to the PC. Be sure to fully insert the
cable into the USB port.