Taser CAM-HD - Manual (Page 22)

TASER CAM HD Recorder
MMU0036 Rev: B Page 22 of 48
Chapter 7: Downloading and Viewing Records
The proper software must be installed before video/audio recordings and
firing logs can be downloaded (see Chapter 5: Configuring the TASER CAM
HD Recorder with EVIDENCE Sync Software).
The TASER CAM HD recorder can store 1 hour of records. After that, new
footage will overwrite the old footage in 10-minute segments.
Note: Because video/audio records are stored in the TASER CAM HD
recorder and firing record data are stored in the X2 ECD, if
downloading records separately, remember to download firing records
from the weapon before or after downloading video/audio from the
TASER CAM HD recorder. You also can download both video/audio
records and firing data by inserting the TASER CAM HD recorder in
the associated ECD and then downloading both through the
EVIDENCE Sync software.
Uploading Records to EVIDENCE.com Services with EVIDENCE
Sync (Online) Software
Follow these instructions if you have an EVIDENCE.com account. If you do
not have an EVIDENCE.com account, see Downloading Records to Your
Computer with EVIDENCE Sync (Offline) Software.
1. Confirm that the X2 safety is in the down (SAFE) position.
2. Remove the Smart cartridges from the ECD. (See the TASER X2 ECD
User Manual for more information on unloading Smart cartridges.)
3. Connect the TASER CAM HD recorder to your computer with the USB
download cable.
4. Start the EVIDENCE Sync software.
5. Enter your login information.
6. Click DEVICE VIDEOS.
7. Click UPLOAD for the video(s) you wish to review. The TIME STAMP
column gives you the time each video was recorded.
Note: When an ECD is connected to the recorder during this process,
the
ECD’s Event Log will be uploaded automatically into the
EVIDENCE Sync application from the ECD. The time stamp is