Taser CAM-HD - Manual (Page 26)

TASER CAM HD Recorder
MMU0036 Rev: B Page 26 of 48
6. Click DEVICE VIDEOS.
7. Click DOWNLOAD for the video(s) you wish to review. The TIME
STAMP column gives you the time each video was recorded.
The time stamp is created by the ECD in Greenwich Mean Time (GMT),
but the EVIDENCE Sync software will convert it to your computer’s local
time. Videos will remain stored on the TASER CAM HD recorder (until
overwritten by new footage) whether they are uploaded or not.
Note: When an ECD is connected, the Event Log will be downloaded
automatically into EVIDENCE Sync from the ECD.
After the videos and firing records have been downloaded, you can play the
video(s) or download another TASER CAM HD recorder and/or X2 ECD.
You will be able to see records only for the recorder and ECD connected to
your computer. To view records for other devices, disconnect and follow the
instructions in Viewing Downloaded Videos (Offline).
Viewing Downloaded Videos (Offline)
As described in Downloading Records to Your Computer with EVIDENCE
Sync (Offline) Software, you can view videos you just uploaded while your
recorder is connected to your computer. If you have disconnected the
recorder from your computer, follow these steps.
1. Start the EVIDENCE Sync software.
2. Click Data.
3. Click DOWNLOADED VIDEOS.