TFC Group Feeling RF Room Thermostat User Manual
Page 41
Advertising
GB
81
Press upper
+
button (
–
button disables the RF signal) to enable an continous RF signal. The receiver
LED will go out as soon as a signal from the transmitter is received. Then press the
OK
-button, the
radio link between transmitter and receiver is now established. Press the
ESC
-button to return to Auto
mode.
Receiver: When operating in heating mode and an ON signal is received, the LED illuminates conti-
nously. When an OFF signal is received the LED will flash intermittently.
Advertising