TFC Group STTR/F User Manual
Page 7
INSTALLATION OF RECEIVER
Caution:
1. It is recommended that this device is installed
by a qualified electrician
2. The appliance can only be mounted indoors
and in areas free from any water or moisture
3. A suitable fuse with a rating not exceeding 13A
should be in the power line
4. Wiring must conform to I.E.E. regulations
RF Address Code Setting
If there is another user nearby, e.g. in the next
dwelling, your Receiver may be operated in error
by their Transmitter. You may select a different
RF address code to prevent this. The Receiver
can only respond to a Transmitter with the same
RF coding as its own address code. Please see
the information below for an explanation of coding
changes.
1. To change the address code of the Receiver,
simply push up one or more of the 5 ‘dip’ switch
levers (see illustration below)
Push up one or more
of the white levers to
adjust Receiver
address code