Connection to usb peripherals, 2 connection to usb peripherals – Datalogic Scanning 00A0LS-1N1-MEN0 User Manual
Page 26
ELF™
3
3.2
CONNECTION TO USB PERIPHERALS
To connect the Elf to a keyboard or a memory, connect the terminal to the
Datalogic 94A051969 cable or to the Datalogic 94A051971 cable (together with
a standard A to micro A USB cable).
For all these devices maximum current withdrawal must be below 100mA.
B
A
C
D
Key:
A) Keyboard with USB interface C) 94A051969 Micro USB Host Cable/
94A051971 Handylink Micro USB Host
Cable
B) Elf
D) Standard A to Micro A USB Cable
B
C
A
D
Key:
A) USB hard drive/ external
memory source
C) 94A051969 Micro USB Host Cable/
94A051971 Handylink Micro USB Host
Cable
B) Elf
D) Standard A to Micro A USB Cable
Connect the Single Slot Dock to the peripheral by means of a Micro-A USB
cord, or use a Micro-A to Std-A receptacle USB adapter such as Datalogic
94A051969 (together with a standard USB cable if needed).
B
A
D
C
E
A)
USB Peripheral (memory)
D) Standard A to Micro A USB Cable
B)
Elf Single Slot Dock
E)
94ACC1381 Power Adapter
C) 94A051969 Micro USB Host
Cable
18