Datalogic Scanning 00A0LS-1N1-MEN0 - Manual (Page 40)

ELF™
4
4.3 DATA CAPTURE
To capture data first of all tap Start > Settings > System > Decoding:
To configure and enable data capture parameters refer to par. 4.6.
4.3.1 Laser Data Capture
To scan barcodes, point the Elf laser model onto the code from a distance
within the reading range while pressing the SCAN key.
The lighted band emitted by the laser must completely intercept the barcode as
shown in the figure below.
32