UVP TB-101 Selector Switch - Manual (Page 2)

4. Remove the four Phillips-head screws and washers securing the transilluminator filter
frame to the body of the transilluminator. Lifting up, remove the transilluminator filter frame
from the transilluminator body. Place the filter frame aside.
5. Using the pliers, remove the securing nut securing the selector switch to the transilluminator
body.
Two of Four
Phillips-Head
Screws and
Washers
Securing Nut
Selector
Switch Shank
Transilluminator
Filter Frame
Transilluminator
Body