VDO M1WL - Manual (Page 3)

3
M1 WL
Display
The VDO M1 WL has a large, easy-to-read display that can be
divided into three areas.
– The top line of the display shows the value
for the selected function.
– The
middle line displays “am” or “pm” if the 12-hour
clock format is used. It also displays whether kmh or mph
has been selected for the speed indicator.
– The
bottom line of the display shows the name
of the selected function in clear text.
Only ONE function at a time appears on the display.
To return to the speed indicator from a selected function,
e.g. ride time, press the SET button.
The SETTINGS can also be used to establish that the speed
indicator is automatically displayed from all other functions
after five seconds.
See page 18: Settings – speed indicator settings
Buttons
The VDO M1 WL has two buttons
SET
In function mode:
– Return to the speed indicator
from any display function
– Open setting mode
(press and hold)
In setting mode:
– Open the setting
– Confirm the setting once ready
– Exit setting mode
and return to function mode
TOP
BOTTOM
MIDDLE
BIKE
In function mode:
– Access functions
– Reset trip data to zero
(press and hold)
In setting mode:
– Scroll in the setting menu
– Change the data to be set