VDO M3WR - Manual (Page 27)

27
M3 WR
Settings – total values – total ride time
You can set the total ride time on the VDO M3.
E.g. you can set your total ride time (cumulative ride time
for all trips) at the start of the new cycling season).
You can set the values separately for bike 1 and bike 2.
ATTENTION: the M3 has a data memory.
No data is lost when the battery is replaced.
How to set the total ride time:
Press and hold the SET button until the settings menu
opens.
Press the
BIKE button to switch from Totals to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the
Total Time.
Press the SET button to open the setting for the Total Time
(total ride time).
Press the BIKE button to select whether you want to set the
total time for bike 1 or bike 2.
Press the SET button to confirm the selection.
The left digit of the hours setting flashes and is ready
to be set.
Press the
BIKE button to set the value for this digit.
Press the SET button to confirm your setting.