VDO M3WR - Manual (Page 32)

32
M3 WR
Resetting the trip section counter to zero
To reset the counter either the section time or the
section distance must be shown on the display.
Press and hold the BIKE button.
The text
Trip Section RESET appears on the display.
If you continue to hold down the BIKE button,
the trip section data is now reset to zero.
The following data is reset to zero:
– Section distance
– Section ride time
Resetting trip data after the trip
After each trip, you can reset the data for this trip to zero.
The VDO M3 is then ready for the next trip.
ATTENTION: your total distance (total number of kilometres/
miles ridden) and total ride time are not reset to zero.
How to reset the trip data:
Press and hold the BIKE button for a few seconds.
The text
Tour Data RESET appears on the display.
If you continue to hold down the BIKE button,
the trip data is now reset to zero.
The following data is reset to zero:
– Distance
– Ride time
– Average speed
– Maximum speed