Voodoo Lab Pedal Power MONDO - Manual (Page 5)

- 3 -
Unpacking
Your Voodoo Lab Pedal Power MONDO box should contain the following:
Pedal Power MONDO unit
Warranty card
AC line cord
DC Power cables:
5.5x2.1mm right angle barrel connectors (10)
5.5x2.1mm straight barrel connectors (2)
5.5x2.5mm right angle “red” barrel (5)
3.5mm right angle mini plug (1)
9V battery snap (1)
Connections
Pedal Power MONDO is powered directly from mains using the supplied AC line
cord. This is a standard computer-type IEC line cord, so it’s easy to obtain a
replacement or different length.
Important: Pedal Power MONDO is manufactured to operate from a specific
supply voltage (100V, 120V or 240V) which is marked on the bottom of the unit.
Attempting to operate at the wrong voltage may cause permanent damage.
(1) AC auxiliary. This is a courtesy AC outlet for convenient powering of AC
powered effects or a MIDI foot controller. Note the 200 watt maximum rating. Do
NOT plug in your amp here!
(2) AC power input jack. This is a standard “IEC-type” connector.