Voodoo Lab System Mix - Manual (Page 8)

6
D I G I T A L M U S I C C O R P O R A T I O N
4. Effects Outputs
One by one, raise the output level of each of your effects devices until the desired effect level is
reached.
5. Wet/Dry Balance
You may reduce the output level of the effects devices if you want less effects in your final mix.
If you want still more effects, lower the output of your preamp or effect send, and repeat steps 3
and 4.
Tip: The wet/dry mix may also be altered by programming the preset output level in your effects
device. You may want to mix the effects a little louder using the effects output control and adjust
the preset levels -- to give yourself some headroom for more effects later.
6. Final Output Level
The Mix 2 knob typically acts as the master volume control for the entire system. The Mix 2
level control does provide up to 6 dB of gain, so be careful to avoid overloading the inputs to
your power amp. Unity gain (straight up) or less is typical.