Vortech 2005-2008 Ford 4.0L V6 Mustang - Manual (Page 21)

P/N: 4FU020-610
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
06AUG08 v4.1 05MusV6(4FU..610v4.1)
11
7. CHARGE AIR COOLER INSTALLATION (H.O. KITS ONLY) , cont’d
NOTE: When installing the cooler, make
sure that the water ports are
configured as shown in Figs.
7B-a, 7c-d. The “top cooler port”
must be the highest point on the
cooler for proper air purging.
B. WATER COOLER ASSEMBLY
INSTALLATION, cont’d
7. Attach the previously assembled water
cooler to the bolts and spacers and
secure with the 8mm nuts and washers
provided. Tighten all cooler hardware at
this time. (See Fig. 7B-e.)
8. Attach the supplied short 90° hose
(7U030-065) to the top port on the CAC
cooler as shown.
9. Install one of the supplied 3/4" hose
unions into the open end of the previously
installed 90° hose and secure. (See Figs.
7C-d)
Fig. 7B-e