Vortech 2005-2008 Ford 4.0L V6 Mustang - Manual (Page 26)

P/N: 4FU020-610
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
06AUG08 v4.1 05MusV6(4FU..610v4.1)
16
Fig. 7D-a
1. Locate assembly 8N155-080.
2. Attach the rear reservoir mounting brack-
et 4FU010-051 to the reservoir with the
1/4-20 x 1/2" long bolts and washers pro-
vided. (See Fig. 7D-a.)
3. Attach bracket 4FU010-061 to the front
of the reservoir with the hardware provid-
ed. (See Fig. 7D-b.)
4. Locate and install 1/4"NPT x 3/8" barbed
fitting in the tapped hole just above the
previously installed mounting bracket.
This hole may have to be opened using
the appropriate drill bit. (See Fig. 7D-c.)
D. ENGINE COOLANT RESERVOIR
INSTALLATION, (2005-2006 Models
Only)
(2007-2008 Models Skip to Section 7E.)
Fig. 7D-b
Fig. 7D-c
7. CHARGE AIR COOLER INSTALLATION (H.0. Kits Only), cont’d