Vortech 1986-1993 Ford 5.0 Mustang - Manual (Page 12)

P/N: 4FA020-010
© 2009 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
16APR09 v4.1(86-93 5.0 Mus (4FA v4.1))
xii
SPECIAL NOTICE CONCERNING ThE
MSD IGNITION SYSTEM
The MSD Boost Timing Master, manufactured by Autotronic
Controls Corporation, that may be included in this kit, is
serviced exclusively by the manufacturer. Autotronic Controls
Corporation warrants this product to be free from defects in
material and workmanship under normal use and if properly
installed for a period of one (1) year from the date of purchase.
In case of malfunction, this unit will be repaired free of charge
according to the terms of the warranty. If found to be defective
as mentioned above, it will be repaired or replaced if returned
prepaid along with proof of purchase. This shall constitute the
sole remedy of the purchaser and the sole liability of Autotronic
Controls Corporation and/or Vortech Engineering, Inc. To the
extent permitted by law, the foregoing is exclusive and in lieu
of all other warranties or representations whether expressed
or implied, including any implied warranty of merchantability or
fitness. In no event shall Autotronic Controls Corporation and/
or Vortech Engineering, Inc. be liable for labor charges, special
or consequential damages.
When returning this unit for service, proof of purchase must
be supplied for warranty verification. After the warranty period
has expired, repair service is charged between a minimum and
maximum charge. In either case, please send the unit pre-paid
with proof of purchase to the attention of:
Autotronic Controls Corporation
Customer Service Department
12120 Esther Lama
Suite #114
El Paso, Texas, 79936
Phone: (915) 855-7123
Fax: (915) 857-3344
www.msdignition.com
The repaired unit will be returned as soon as possible after
receipt, COD for any charges. Be sure you include a detailed
account of any problems experienced, the type of vehicle and
any modifications.
Should you have any technical or installation questions
regarding this unit, contact Vortech Engineering, Inc. directly
at (805) 247-0226.