Vortech 1991-1994 Ford 4.0L Ranger/Explorer - Manual (Page 12)

P/N: 4FD020-010
©2001 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
31JUL01 V1.1
(Explorer/Ranger(4FD V1.1))
6. FUEL PUMP
A. Release any pressure from the fuel tank by
momentarily loosening the filler cap.
B. Disconnect the line to the fuel filter by carefully
removing the white retaining tab. Attach the line
to the adapter fitting as shown.
C. Mount the fuel pump on the frame near the filter
using the supplied #10 nut and bolt.
D. Connect the fuel pump inlet to the adapter with
the 3/8" hose provided.
E. Connect the fuel pump outlet to the filter inlet
with the 5/16" hose. Use the supplied Ford fuel
connector and hose clamp.
F. Attach the negative pump terminal to a clean
ground fastener with the wire provided.
G. Connect positive terminal on fuel pump to fuse
box (30 amp A/C works well).
H. Secure the fuel pump and hose with the clamps
provided.
I. After installation is complete, start engine and
check system for leakage.
VORTECH FUEL PUMP
GROUND (-)
ADAPTER FITTING
EXISTING FEED LINE
FROM TANK
STOCK
FUEL FILTER
TO
RAIL
3/8" FUEL LINE
5/16" HOSE
FUSE BOX (+)
6
NOTE: Make sure that the hoses are routed
smoothly with no kinks or sharp bends
and away from sharp objects.
Fig. 6-a