Vortech 2005-2008 C6 Corvette - Manual (Page 19)

P/N: 4GS020-010
©2009 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
12MAY09 v3.1 05-08Corvette(4GSv3.1)
10
Fig. 9-c
9. INLET DUCT INSTALLATION
A. Bend the radiator side-plate as shown. (See
Fig. 9-a.)
B. Attach the inlet duct to the supercharger inlet
using the supplied Ø3.75" sleeve and #60
clamps.
C. Install the supplied 3/8" elbow in the hole in
the end of the air filter.
D. Install the air filter onto the duct inlet.
E. LS2-Connect supplied 3/8" hose from the
elbow installed in the air filter to the passen-
ger’s side valve cover breather hose barb
using the supplied 3/8" hose.
Z06-Remove the plastic fitting from the facto-
ry rubber inlet sleeve. Install the fitting into
the plastic hose. Connect the supplied 3/8"
hose from the elbow installed in the air filter
to the fitting just installed in the plastic hose.
Fig. 9-b
Fig. 9-a