Vortech 2005-2008 C6 Corvette - Manual (Page 20)

P/N: 4GS020-010
©2009 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
29MAY09 v3.1 05-08Corvette(4GSv3.1)
11
A. Z06 vehicles, install the supplied bracket
onto the passenger’s side CAC studs so that
it lines up with the oil cooler. Use the original
hardware to secure the oil cooler. (See Fig.
10-c.)
B. Install the lower side panel onto the driver’s
side studs. (See Fig. 10-b.) For ZO6 vehi-
cles, use the original hardware to go through
the panel and support the oil cooler. (See
Fig. 10-d.)
C. Install the air temperature sensor on the
inside of the passenger’s side panel using the
original plastic push pin. (See Fig. 10-e.)
D Install the radiator support pieces onto the
frame rail using the original hardware. (See
Fig. 10-f.)
E. Attach the air temperature sensor to the
inside of the passenger’s side side-panel.
(See Fig. 10-e.)
F. Lower the driver and passenger’s side panels
into place, plug in the air temp sensor and
secure with the supplied 10-24 hardware.
(See Fig. 10-g.)
10. RADIATOR SHROUD INSTALLATION
Fig. 10-a (Passenger’s Side Support) C6
Fig. 10-b (Driver’s Side Support)
LOWER SIDE
PANEL
Fig. 10-d (Driver’s Side Support)
Show w/Z06 Oil Cooler
Fig. 10-c (Driver’s Side Support)
Shown w/Z06 Oil Cooler Support
ORIGINAL
HARDWARE
ORIGINAL
HARDWARE