Discharge installation, cont’d – Vortech 2004 Pontiac GTO User Manual
Page 25
17
P/N: 4GJ020-010
©2004 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
28SEP04 v1.0 GTO(4GJ020-010v1.0)
11.
DISCHARGE INSTALLATION, cont’d
Fig. 11-e
Fig. 11-f
Fig. 11-g
H.
Trim and orient the supplied molded Ø1.0
long 45° as shown in Fig. 11-e.
I.
Connect the open end of the straight bypass
hose to the Ø1.0 bung on discharge tube A.
Connect the open end of the 45° molded
hose to the Ø1.0 bung on the inlet duct.
Secure the ends with #16 hose clamps. (See
Fig. 11-g.)
J.
Cut into the brake booster hose as shown
(see Fig. 11-f) and insert the supplied brass
TEE fitting.
K.
Connect the 5/32" vacuum line from the
bypass valve nipple to the installed TEE fit-
ting.
6" PIECE OF Ø1.00 HOSE
THAT CONNECTS TO THE
DISCHARGE TUBE
TRIMMED 45° HOSE
THAT CONNECTS TO
THE INLET TUBE
SUPPLIED BRASS
TEE FITTING