Pontiac gto, Installation instructions – Vortech 2004 Pontiac GTO User Manual

Page 5

Advertising
background image

v

P/N: 4GJ020-010

©2004 Vortech Engineering, LLC

All Rights Reserved, Intl. Copr. Secured

28SEP04 v1.0 GTO(4GJ020-010v1.0)

Before beginning this installation, please read through this entire instruction booklet and the Street Supercharger
System Owner’s Manual which includes the Limited Warranty Program, the Warranty Registration form and return
envelope.

Vortech supercharger systems are performance improving devices. In most cases, increases in torque of 30-35%
and horsepower between 35-45% can be expected with the boost levels specified by Vortech Engineering. This
product is intended for use on healthy, well maintained engines. Installation on a worn-out or damaged engine is
not recommended and may result in failure of the engine as well as the supercharger. Vortech Engineering is not
responsible for engine damage.

Installation on new vehicles will not harm or adversely affect the break-in period so long as factory break-in pro-
cedures are followed.

For best performance and continued durability, please take note of the following key points:

1.

Use only premium grade fuel 91 octane or higher (R+M/2).

2.

The engine must have stock compression ratio.

3.

If the engine has been modified in any way, check with Vortech prior to using this product.

4.

Always listen for any sign of detonation (pinging) and discontinue hard use (no boost) until problem is
resolved.

5.

Perform an oil and filter change upon completion of this installation and prior to test driving your vehicle.
Thereafter, always use a high grade SF rated engine oil or a high quality synthetic, and change the oil
and filter at least every 3,000 miles. Never attempt to extend the oil change interval beyond 3,000 miles,
regardless of oil manufacturer’s claims as potential damage to the supercharger may result.

6.

Before beginning installation, replace all spark plugs that are older than 1 year or 10,000 miles with origi-
nal heat range plugs as specified by the manufacturer and reset timing to factory specifications (follow
the procedures indicated within the factory repair manual and/or as indicated on the factory underhood
emissions tag). Do not use platinum spark plugs unless they are original equipment. Change spark plugs
every 15,000 miles and spark plug wires at least every 50,000 miles.

TOOL & SUPPLY REQUIREMENT

Factory repair manual

3/8" socket and drive set: SAE & metric

1/2" socket and drive set: SAE & metric

Adjustable wrench

Open end wrenches

5 quarts SF rated quality engine oil, oil filter and wrench

GM power steering pulley puller/installer

Hose cutters

SAE nut drivers

Lithium grease

Grinder/hacksaw

Allen wrenches: SAE & metric

If it has been 10,000 miles or more since your vehicle’s last spark plug change,

then you will also need:

Spark plug socket

NEW spark plugs

2004

PONTIAC GTO

Installation Instructions

Congratulations on selecting the best performing and best backed automotive

supercharger available today... the VORTECH® supercharger!

Advertising