Vortech 1996-1998 Ford 4.6L Mustang Cobra - Manual (Page 6)

A. Remove strut tower brace from the vehicle.
B. Disconnect and remove the battery (if located
in the factory position, the battery will need to
be relocated to the trunk).
C. Remove the supercharger discharge tube and
bypass valve assembly.
D. Remove belt, supercharger and bracket.
Disassemble the bracket from the supercharger.
E. Disconnect lines from the air inlet that connects
to the idle air control and valve cover vent.
1. Preparation and Removal
NOTE: Temporarily cap oil feed and oil drain
to protect your engine from foreign particles.
1 © 1999 VORTECH ENGINEERING, INC.
All Rights Reserved, Intl. Copr. Secured