Idle air control and valve cover vent lines – Vortech 1996-2004 Ford 4.6L Mustang GT User Manual
Page 12
Advertising
4
P/N: 8N020-030
© 2002 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23JAN00 V2.1 (2V Maxflow Power Cooler.qxd)
A.
Using the 3/4” 90° elbow slide the shortest end
onto the 3 1/2” x 45° inlet elbow and insert the 3/4”
hose union into the opposite end.
B.
Cut a piece of 3/4” hose 34” in length and attach
to the 3/4” hose union and to the idle air control
motor.
C.
Attach the short end of the 5/8” x 24” 90° hose to
the 3 1/2” x 45° inlet elbow and install the 5/8”
hose union into the free end (see Figure 4-a).
D.
Connect the valve cover vent line to the 5/8” hose
union and trim the excess line as needed (see
Figure 4-b).
4. Idle Air Control and Valve Cover Vent Lines
Figure 4-a
1996-1998 Models
Figure 4-b
Figure 4-c
1999-2001 Models
Advertising