Vortech Maxflo Fuel Pump Booster (FPB) - "Universal Fit" - Manual (Page 4)

DP/N: 007128v1.1, 2012-04-30
© 2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured. iv iv
VORTECH FUEL PUMP VOLTAGE BOOSTER
Universal Wiring Instructions
Before beginning this installation,
please read through this entire instruction booklet
The Vortech Fuel Pump Booster (FPB) upgrade was designed specifically for use on
performance applications where there is a requirement to provide increased fuel pump
performance above what the vehicles' existing fuel pump can provide. Typical applica-
tions would include vehicles equipped with forced induction, nitrous oxide etc. As with
any power enhancing product, this unit is intended for use on healthy, well-maintained
engines. Vortech Engineering is not responsible for engine or fuel component damage.
For best performance and continued durability, please take a note of the following key
points:
1. Use only premium grade fuel 91 octane or higher (R+M/2).
2. Always listen for any sign of detonation (pinging) and discontinue hard use (no
boost) until problem is resolved.
TOOL & SUPPLY REQUIREMENTS:
• General hand tools
• Heat Gun
• Soldering Iron/Gun
Solder •
• Electrical Tape
• Wire Cutters, Strippers and Crimpers
• Drill Motor
• Drill Bit
Mounting hardware •
(optional- OEM fuel pump wiring schematic) •