Vortech Maxflow Fuel System - Manual (Page 6)

C. Fuel pump and fuel filter mounting/Feed hose, (cont'd.)
6
FUEL SYSTEM
SCHEMATIC
NOTE: DO NOT Pre-cut hose. Uncut bulk
length hose has been supplied in this kit to
allow for minor variances in each installa-
tion. The schematic shows the intended
layout of fittings, hose ends and general
hose lengths (study over diagram before
proceeding). Actual hose length may vary
slightly due to installer and/or vehicle setup.
Use the lengths shown/given as a guide-
line. Measure between the fittings that are
to be connected before cutting hose. FRONT OF
VEHICLE
➛
FUEL REGULATOR
ADAPTER
VORTECH
-10 O-RING (2 PLACES)
SPLICE IN FMU HERE
(IF USED)
-10X 12" LONG 'PUSH-
ON' HOSE
VORTECH
-6 X 22" LONG HOSE
-6 X 34" LONG HOSE
-6 RETURN HOSE
-6 X 7" LONG HOSE
-6 X 7" LONG HOSE
-6 X 32" LONG HOSE
-6 X 32" LONG HOSE
-8 X 15' LONG HOSE
-6 X 200" LONG HOSE
FUEL TANK PICKUP
-6 O-RING (7 PLACES)
-6 X 6" LONG 'PUSH-
ON' HOSE
-6 X 6" LONG 'PUSH-
ON' HOSE