Volant Avalanche 1500 - Manual (Page 4)

Closed Box Air Intake System
99-07Classic GM Truck/SUV 4.8/5.3L/6.0L
PN 15153/151536
7/28//2014
INS15153 Volant Performance · 140 Blaze Industrial Pkwy · Berea, OH 44017 · P: (909) 481.3888 · F: (440) 891‐1868
4
E-Mail: [email protected] www.volant.com
21. Tighten the filter into using a 5/16 nut driver or socket wrench only. (Fig U)
22. Remove the protective film on the lid and place it on top of the Volant box. (Fig V)
23. Tighten the lid in place using the provided truss head screws and rubber washers. (Fig W)
24. Attach the MAF sensor harness to the MAF sensor . (Fig X)
25. Press the 3 3/4 x 4 1/2 sleeve onto the MAF sensor with a #60 clamp. (Fig Y)
26. Tighten the #60 clamp into place using a 5/16 nut driver or socket only. (Fig Z)
27. Press the supplied throttle body grommet onto the throttle body end of the Volant air duct. (Fig AA)
28. Press the Volant air duct into the sleeve and onto the throttle body. (Fig BB)
29. Tighten the sleeve onto the air duct with a #60 clamp and a 5/16 socket or nut driver only. (Fig CC)
30. Tighten the #72 clamp onto the throttle body using a 5/16 socket or nut driver only. (Fig DD)
31. Place the supplied CARB EO label near the system, this label will be needed to pass a visual smog test. (Fig EE)
32. Reinstall the factory engine cover and negative battery cable, Check all connections before starting the vehicle
and after 150 and 350 miles of normal driving. (Fig FF)
INSTALLATION PHOTOS ON NEXT PAGE