Waldorf Blofeld Keyboard - Manual (Page 73)

Sound Parameter
73 Blofeld User´s Manual
• Press and hold the first key of the chord.
While holding this key, enter the other keys
sequentially. After playing all keys, you can
release the first key. This method is practical
for playing difficult chords. It allows you to
create arpeggios in the sequence of played
notes. You can even hit the same note
several times and it will appear in the note
list accordingly.
w
You can stop playback of the Arpeggiator by pressing
the Shift + Play buttons, by setting Mode to off, on
or One Shot, or by sending an All Notes Off message
from your sequencer.
Clock 1/96…64 bars
Sets the note value for the steps of the rhythm pattern in a
range from whole notes to thirty-second triplet notes.
Triplets (e.g. 1/8T) and dotted notes (e.g. 1/16.) are
available for every note value.
Tempo 40...300
Sets the basic tempo of the arpeggiator and the Clk. Delay
in BPM (beats per minute).
Pattern off / User / 1…15
Sets the rhythm pattern that is used for generating the
arpeggio. Pattern
(Muster) can set to off, User or to one
of the 15 ROM patterns.
•
If off is selected, the arpeggiator plays back a
continuous sequence of notes with the current
Clock
setting.
• User gives you the ability to create your own
custom rhythm pattern. This pattern is stored in in
the sound. See the section "Arpeggiator Step Data
Pages" below about the pattern settings you can
create.
• 1…15 selects one of the 15 internal ROM rhythm
patterns. See the table below for an overview of
each ROM rhythm pattern: