Waldorf Wave 3.v - Manual (Page 35)

The Controls
35 PPG Wave 3.V User´s Manual
sounds one octave lower than it was originally
programmed.
• Detune (DTN) fine-tunes the selected part in steps of
1/64th of a semitone.
• Lo Key range can be restricted fort he part´s tone
generation. Only notes with the key number higher or
equal to the selected value are passed through. Set this
parameter to C-2 if you want to use the full keyboard
range.
• Hi Key ist he counterpart to the Lo Key paramater.
Only notes with a key number lower or equal to the
selected value are passed throug. Set this parameter to
G8 if you want to use the full keyboard range.
• Transient is for loading a separate sample for each
part. This is similar to the parameters in the DIGITAL
and in the TRANSIENT menu. If you set up samples for
up to 8 programs you can see an overview of the
loaded samples. Alternatively you can load 8
corresponding samples (so called Multi samples) and
set up with Hi Key and Lo Key to play it as one single
sound (by using the same MIDI channel). Click on the
corresponding arrow button to open a context menu
and choose “Load Transient...”. “Clear” removes a
loaded Transient.
w
More information about Transients and their usage
can be found in the chapter “Transient Menu”.
w
What is a Multi sample?
A Multi-Sample is a bunch of different recordings of
the same single sound in different pitch ranges or
with different articulations. Since harmonics’
characteristics of most sounds change enormously
over the tone ranges and when played differently,
Multi-Samples are the only way to capture all
nuances of the entire sound. PPG Wave 3.V allows to
map up to 8 samples on your keyboard to receive a
more natural sound.
m
If you have loaded a Transient, Wavetable playback
is disabled for the corresponding Program.