Waldorf Wave 3.v - Manual (Page 7)

Installation
7 PPG Wave 3.V User´s Manual
Installation
System Requirements for Windows
In order to be able to use the PPG Wave 3.V, you will
need at least:
• A PC with a Pentium IV or AMD Athlon 1 GHz
processor or better, we recommend a fast CPU.
• 64 MB free RAM.
• Windows XP or newer.
• VST 2.4 compatible host application such as
Steinberg Cubase or newer. This must be correctly
installed on your computer.
•
AAX compatibel host application such as Pro Tools
10. This must be correctly installed on your
computer.
w
Please also observe the system requirements of your
host application!
w
PPG Wave 3.V runs within 32 bit as well as 64 bit
host applications.
Installation under Windows
Proceed as follows to install the PPG Wave 3.V:
Installation from CD-ROM:
1. Start your computer and launch your operating system.
Insert the PPG Wave 3.V CD-ROM into your DVD/CD-
ROM drive. If you have enabled the Autostart function in
Windows, the Installer will start automatically and you
can proceed with Step 5 below. If not, please proceed as
follows:
2. Launch the Explorer or open the window “My
Computer”.
3. Double click on the icon for the drive that holds the
PPG Wave 3.V-CD-ROM.
4. Double click on the PPG Wave 3.V Installer icon. This
launches a special installation program.
5. Follow the on-screen instructions.
w
After installing PPG Wave 3.V you will have to
activate the program on your computer Please refer to
the chapter “Activation of PPG Wave 3.V”.