Waldorf Lector - Manual (Page 27)

The Controls in Detail
27 Lector User´s Manual
Selects how incoming MIDI data will trigger the Lector
synthesiser:
• Normal will respond to incoming MIDI notes to
control the synthesizer polyphonically You need to
use a MIDI track within your host application to route
MIDI data to Lector.
• Single will respond to incoming MIDI notes to
control the synthesizer monophonically You need to
use a MIDI track within your host application to route
MIDI data to Lector.
• Latch will simply trigger the Lector synthesizer
permanentely with the MIDI note C3. It does not
need any MIDI input signal. Select Latch if you don´t
have a MIDI keyboard or for diagnostic purposes.