Waldorf Lector - Manual (Page 33)

The Controls in Detail
33 Lector User´s Manual
w
Adjusting the EQ levels will change the intelligibility
of the vocoded signal. For more female tones, try
higher values for Treble, and lower values for Bass.
When you set Mid Frequency to 1 and Mid Gain to
0dB you can using Treble to receive a proportional
increasing or decreasing of all bands. This is more
comfortable as to work with three gain knobs.
.
Output
The Output section allows you to adjust the audio levels
of the different sources in Lector.
Speech -∞...0dB
This fader will set the “dry” level of your analysis material.
Typically, you will want to set the level to zero for classic
vocoding sounds.
Carrier -∞...0dB
This fader allows you to mix the “dry” synthesizer sound
in with the other two sources. Depending on the gain
settings of the amplifier in the synth section, you will want
to set this fader to maximum comfortable level when
using Lector as a synthesizer. For classic Vocoder use, it
should be set to zero.