Waldorf Pulse 2 - Manual (Page 40)

Additional Settings
Pulse 2 User Manual 40
Additional Settings
Global parameters are settings that affect the Pulse 2
general response. Global parameters are stored automat-
ically when you leave the Global menu, so you are not
required to save them manually.
The Global Menu
All Global parameters are located in the Global Menu.
Hold the Shift button and press the Global button to
access the Global menu. Use the Selection buttons to
select the desired Global parameter, which can be edi-
ted with the Selection dial.
Mastertune 430...450
Controls the Pulse 2 overall pitch in Hertz. The value
specified here is the reference pitch for MIDI note A3.
The default setting is 440Hz, which is commonly used
by most instruments.
m
You should only change this setting if you really
know what you’re doing. You will have to adjust
all your other instruments, too. Don’t forget to
set it back again!
Transpose -24...+24
Allows a global pitch transposition for the tone genera-
tor. Incoming MIDI notes are shifted by the number of
semitones.
MIDI Channel OMNI / 1...16
Sets the basic send and receive channel for the Pulse 2.
This setting is valid for all Sound programs. If omni is
selected, the Pulse 2 sends on channel 1 and receives
on all channels.
m
Please use omni only for test purposes if you
wish to check the basic MIDI send and receive
functionality. As soon as you know that the Pul-