Waldorf Pulse 2 - Manual (Page 44)

Additional Settings
Pulse 2 User Manual 44
• UNIPOL sets the basic value for sending unipo-
lar modulation sources as envelopes or velo-
city. The default value is 0 V and can be modi-
fied in the Modulation matrix.
• BIPOL sets the basic value for sending bipolar
modulation sources as LFOs. The default value
is middle voltage and can be modified in the
Modulation matrix.
CV Tune -64...+63
Scale/slope adjusting parameter for the CV output. A
spread from 1.5 to 2.5 is possible.
CV Adjust -64...+63
Determines a fixed value which will be added to the
control voltage.
Gate Mode HIGH / LOW
Setting of the polarity of Gate Out.
•
HIGH is 3.3 V, high with active trigger.
• LOW is 0 V, low with active trigger
w
A value will be triggered, when the ENV A enve-
lope is also triggered. When a retrigger mode is
set, Gate will be set to inactive for nearly one
milli second to trigger a new impulse within the
receiver.
The Utility Menu
Aside from the different Midi Dump Options, the Utility
menu contains further helpful functions.
Hold the Shift button and press the Utility button to
access the Utility menu. Use the Selection buttons or
the Selection dial to select the desired Utility parame-
ter.