Weston Manual Kitchen Kit - Manual (Page 4)

-4- -9-
MIXER/CHOPPER ASSEMBLY
1. Attach the Removable Handle to the Mixing
Container. Align the bottom of the Removable
Handle with the “C” shaped handle of the Mixing
Container. Pull up and over on the Removable
Handle to snap the Handle onto the Mixing
Container (Figure A). Test to make certain the
Removable Handle is snug into position on the
Mixing Container.
2.
Beater Attachment or the 3 Blade Chopper
Attachment: From the underside of the Mixing
Lid, align the slot of the Beater Attachment or
the 3 Blade Chopper Attachment with the post in
the Mixing Lid. The Attachment should fit snugly
onto the post (Figure B).
3. Align the grooves in the Mixing Handle with
the splines on the Mixing Lid. Push the Mixing
Handle firmly down (Figure C).
4. Line up the spout shield on the
Mixing Lid
with the Spout on the Mixing Container, turn
the Mixing Lid slightly to the right to misalign the
spout shield. Place the Mixing Lid on the Mixing
Container and turn the Mixing Lid clockwise to
lock the Mixing Lid onto the Mixing Container.
The Attachment should be on the Attachment
Hub (Figure D).
5. The
Mixer/Choppper is now ready to use
(Figure E).
Figure B
Beater
Attachment
Slots for Mixer
& Whisk
Attachments
Underside of
Mixing Lid
Figure A
Removable
Handle
Mixing Container
“C” handle
Figure C
Splines
Mixing Lid
Mixing Handle
Figure D
Attachment Hub
Spout Shield
Figure E
Spout
EGG SEPARATER ASSEMBLY & USE
1. The Egg Separator rests in the top of the Mixing
Lid Assembly (Figure P).
2. Gently crack the egg into the
Egg Separator.
The wihites of the egg will sift through the hole in the
unit and into the Mixing Container. The yolk will
be left in the Egg Separator to discard or save for
other uses.
Figure P
Egg Separator
Mixing
Lid
Assembly
Mixing Container
CLEANING INSTRUCTIONS
1. Disassemble all parts of the Mnaual Kitchen Kit. CAUTION! If using the 3
Blade Attachment the Blades are Very Sharp!
2.
Cleaning the Manual Kitchen Kit should be done immediately after use to prevent
food from drying on the parts. The Manual Kitchen Kit should be washed by hand in
warm soapy water, rinsed, then dried immediately. Never use harsh abrasives or pads
to clean the Manual Kitchen Kit.
3. The Manual Kitchen Kit can be washed in the top rack of a dishwasher. Carefully
position these pieces where they won’t cut or damage other utensils.
CAUTION: Once the 3 Blade Attachment or
the Mandoline Blades are removed, DO NOT
immerse it in water! Blades should be washed
either in a top rack of the dishwasher or by holding
onto the plastic portion of the Blade. With a soapy
towel, wipe AWAY from the Blade edges. To
rinse Blade, hold by the Handle and wipe with a
clean, damp towel, or hold under running water.
Dry thoroughly.
4. Store the 3 Blade Attachment inside
the Mixing Container. It is safest to place the
cardboard blade covers back onto the blades
before storage. Return the Manual Kitchen Kit
and all parts to the original box. Store in a cool,
dry area. BE SURE TO STORE OUT OF REACH
OF CHILDREN!
WARNING
SHARP BLADES!
Protective/cut-resistant
Kevlar Gloves are
recommended whenever
handling the
3 Blade Attachment or
Mandoline Blades!
CAUTION SHARP!