Wyred 4 Sound DSDse - Manual (Page 6)

_____________________________________________________________________
WYRED 4 SOUND DAC-v1.2
4235 Traffic Way Software ver. 1.91
Atascadero, CA 93422
PH: 805-466-9973
FAX: 805-462-8962
[email protected]
www.wyred4sound.com
©2013 WYRED 4 SOUND LLC
All rights reserved
pg. 4
S S e e t t u u p p M M e e n n u u
With a quick look at the setup options, you will quickly see how flexible the DAC-2 DSD really is. Each
type of input can be configured to fixed or variable volume control, and you can also independently choose
the level of each. Min/Max volume levels are also adjustable for each input to offer optimal flexibility for
those low or high sensitivity systems. As you will find, other setup options include remote on/off, Discrete
input select on/off, HT trigger in/remote trigger on, HT display dim level, I
2
S justification select for the HDMI
input, IIR Bandwidth, Roll-off slope (fast/slow), and a default reset in case things get jumbled up.
To enter the Setup Menu, first turn the unit off from the power button on the front. Next push and
hold the (UP) and (DOWN) buttons at the same time and press the (POWER) button once quickly. Once the
menu is activated, you can use the up and down buttons to scroll through the different setup registers. Once
the register is selected that you wish to adjust, tap the power button to select and enter that register. The
menu will now be adjustable (EDIT MODE) and you can use the up/down buttons again to edit the settings.
Once the desired setting has been selected and is displayed, tap the power button again to save and return to
the main menu. You can now scroll through more settings and use the same method to make the changes
needed. To exit and apply all changes, press and hold the power button in any main menu register (NOT IN
EDIT MODE). The unit will then power down and will be ready for use.
Default Reset: Power the unit off from the power button on the front. Next push and hold the (UP) and
(DOWN) buttons at the same time and then press and hold the (POWER) button. After several seconds you will
see ----Reset---- on the screen, at which point you can release all buttons. Once the screen goes blank, a
default reset has been applied which restores all settings to their factory configuration.
The Menu Map is as follows:

IIR Bandwidth (<50k / 50k / 60k / 70k)

Roll-off slope (Fast / Slow)

I
2
S Type (I
2
S / Left justified / Right justified)

Remote control select / Trigger in use (On-Off / Off-Off / On-On / Off-On)
-See “DC Trigger / HT Bypass” for more information

DSD HT Display Dim level (Off / Low / Medium / High)
DSD se  HT Display Dim level (Off / High)

Coax Volume select (Variable / Fixed)

Coax Minimum Volume level (0-70)

Coax Maximum Volume level (0-70)

Toslink Volume select (Variable / Fixed)

Toslink Minimum Volume level (0-70)