Reading the display turning the wave, Radio iii on and off, Controlling the volume – Bose Wave Radio III User Manual
Page 9: Setting the sleep timer
English – 9
Reading the display
Turning the Wave
on and off
To turn the system on or off (standby):
• Press the remote power button
• Touch the touch pad.
The last source you
were listening to will
Press any source button to turn the
III on to that source.
Note: Pressing AUX does not turn on a device connected
to AUX IN (such as your TV). Be sure to turn the device on
Note: After 24 hours of no button presses the system
automatically switches to standby (off). If the 30-minute
system standby timer (page 18) is enabled, the system
automatically switches to standby if no audio is played and
no buttons are pressed for 30 minutes.
Controlling the volume
Press and hold Volume
to adjust the
volume level. VOLUME - 0 (silent) to 99 (loud)
appears on the display to indicate the level.
Press Mute to silence the Wave
Mute again, or press Volume
To lower the volume before unmuting, press Volume
Note: When the Wave
III is off, the volume can only
be adjusted between 10 and 75.
Setting the Sleep timer
Press Sleep to set the Wave
III to shut
off automatically after a selected period of time.
• After pressing Sleep, SLEEP - 30 MIN (or your last
setting) appears on the display and the sleep timer
begins counting down. If your Wave
III is off,
press Sleep to turn it on and immediately set the
sleep time. The last source selected will start playing
as the sleep timer counts down.
• While the SLEEP setting is displayed, press Sleep
again to set the sleep timer to 10-90 minutes (in 10-
minute increments) or OFF.
Note: While in sleep timer setup mode, if more than 10
seconds elapses between button presses, the Wave
III will automatically exit the sleep timer setup mode.
• To review the remaining sleep time, press Sleep.
• To cancel the sleep timer, press On/Off.
FM, AM, or AUX
Station or system-related information
Seine_SRA_OG.book Page 9 Monday, November 7, 2011 11:54 AM