Fluke 117 - Manual (Page 9)

True-rms Multimeters
Rotary Switch Positions
7
Rotary Switch Positions
Switch
Position
Measurement Function Model
x Automatically selects ac or dc volts based on the sensed input with a low
impedance input. 114 & 117
e
Hz (button)
AC voltage from 0.06 to 600 V.
Frequency from 5 Hz to 50 kHz. 114, 115 & 117
115 & 117
D DC voltage from .001 V to 600 V. 114, 115 & 117
l AC voltage from 6.0 to 600 mV, dc-coupled. DC voltage from 0.1 to 600 mV. 114, 115 & 117
Ω
Ohms from 0.1 Ω to 40 MΩ. 114, 115 & 117
s Continuity beeper turns on at < 20 Ω and turns off at >250 Ω. 114, 115 & 117
R Diode Test. Displays OL above 2.0 V. 115 & 117
S
Farads from 1 nF to 9999 μF. 115 & 117
j
Hz (button)
AC current from 0.1 A to 10 A (>10 to 20 A, 30 seconds on, 10 minutes off).
>10.00 A display flashes. >20 A, OL is displayed. DC-coupled.
Frequency from 45 Hz to 5 kHz.
115 & 117
I DC current from 0.001 A to 10 A (>10 to 20 A, 30 seconds on, 10 minutes off).
>10.00 A display flashes. >20 A, OL is displayed.
115 & 117
w Non-contact sensing of ac voltage. 117
Note: All ac functions and Auto-V LoZ are true-rms. AC voltage is ac-coupled. Auto-V LoZ, AC mV and AC
amps are dc-coupled.