NEC SV8100 - Manual (Page 35)

29
CONFERENCE
1. Establish an intercom or trunk call.
2. Press the Conf Softkey or the Conference key
(Service Code 851:07).
3. Dial the extension you want to add.
-OR-
Access an outside call.
Note: To get the outside call, you can either press a
Line key or dial a trunk/trunk group access
code.
4. When the called party answers, press the
Conference key twice.
Note: If you cannot add additional parties to your
conference, you have exceeded the system’s
Conference limit.
5. Repeat steps 2~4 above to add more parties.
CALL PARK – SYSTEM
To Park a call in a system orbit:
Note:
You can Park intercom or trunk calls.
1. Press the Park key (Service Code 852: *04 + orbit).
Note: The Park key LED lights.
2. Use Paging to announce the call.
3. Press the Speaker key to hang up.
Note: If not picked up, the call will recall you.
-OR-
1. Press the Transfer key.
2. Dial 831 and the Park orbit (01~64).
Note: If you hear a busy tone, the orbit is busy. Try
another orbit.
3. Use Paging to announce the call.
4. Press the Speaker key to hang up.
Note: If not picked up, the call will recall you. TALKING TO EXT 12345
2-11 MON 10:56AM
Conf
ICM DIAL
CONF
AnHd Dir
PARK HOLD
Park No. Dial