NEC SV8100 - Manual (Page 60)

54
Add New Data
STEP 1: Press Menu key. The menu screen is
displayed in LCD.
STEP 2: Select 2. Directory by using Cursor Key,
Digit Key (2) or Softkey. (DT7XX menu
shown)
STEP 3: Select 1. REGIST by using Cursor Key, Digit
Key (1) or Softkey.
STEP 4: Select Name or Telephone Number by using
Alpha or Num Softkey to toggle between the
two.
STEP 5: Enter a name or telephone number to be
registered in the directory using the dial pad.
STEP 6: After entering the name or telephone, press
the Hold key.
STEP 7: The following list appears. Select a desired
group by entering a number.
STEP 8: Enter the telephone number as indicated in
the display and press the Hold key.
STEP 9: Enter a desired Memory ID.
STEP 10: After entering the Memory ID, the display
goes back to the main directory screen. Press
exit to go back to the main screen.
[Directory]
Personal
[Directory]
[Directory]